top of page
MODEL B XL

The big brother of our classic looking bush plane design is finally here! A 1.5 metre wingspan, sturdy landing gear (with huge all terrain tundra tyres), independent flaps and interchangeable floats are some of the main features of this plane. The bigger size makes the aircraft much easier to fly compared with the original Model B.  This, together with the simple and sturdy landing gear concept, makes this aircraft one of our best trainers. Keep in mind that this is not just a scaled design of our well known Model B.  The Model B XL has been designed from scratch implementing the latest design concepts including compatibility with the "spiralize outer contour/vase mode" option; the newest printing category B2. Furthermore, the aerodynamics have been revised to improve the aircraft’s safety and performance.

Includes:
-STL files

-2 Scheme design
-G-codes

€38

Features:
-Bush plane
-Optional floats

-Durable landing gear

-Flaps

-Trainer

SPECIFICATIONS

PRINTED WEIGHT                    700g
TAKE OFF WEIGHT                  1300g      
STALL SPEED                        32km/h
WING LOADING                    40g/dm² 

WING SPAN                 1500mm (60")
WING SURFACE            32dm²
WING ASPECT RATIO    7
LENGTH                      1050mm

Note: It is required the use of LW-PLA for this model.

*Weight shown valid for land version. Float version weight 200g more

ARRANGEMENT DRAWING AND PRINTING PARAMETERS​

Printing parameters.jpg

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER
MIN PRINTING VOLUME - 200x200X200 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm


Recommended

FILAMENT
QUANTITY -  
Land version- ≈560g (LW-PLA) , ≈80g (PLA) 20g (TPU)
Float version- ≈76
0g (LW-PLA) and ≈160g (PLA) 20g (TPU)

Recommended

colorfabb.JPG

CONFIGURATION 1

POWERFUL POWER PACK
(This configuration is mandatory for the float version)

MOTOR
KV-  1250
MAX POWER -  300 to 1000 watts
DIAMETER - 35mm
VOLTAGE - Up to 14,8V (4S)

Proposed
SunnySky X2814 1250KV

ESC

CURRENT - 50A

VOLTAGE -  Up to 14,8V (4S)

​

Proposed
Aerostar 50A

2814-.jpg
ESC.JPG

PROPELLER
8x6
Note: Do not use bigger prop for the float version

Proposed:
Gemfan 8X6

prop.JPG

BATTERY
VOLTAGE - 14,8V (4S)
CAPACITY - 2000 mAh
DISCHARGE - >20C 

Recommended
BAT3
 

bat.jpg

CONFIGURATION 2

ECLIPSON STANDARD POWER PACK
SERVOS NEEDED - x6
Note: In order to cool down the motor it is not recommended to use the spinner for this configuration.


Recommended

Captura.PNG

BATTERY
VOLTAGE - 14,8V (4S)
CAPACITY - 2000 mAh
DISCHARGE - >20C 

Recommended
BAT3
 

bat.jpg

RADIO CONTROL SYSTEM
MIN CHANNELS - 7CH

Recommended

Captura.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 650mm)  2units
-PUSH RODS - D1,2mm (min length 60mm)  4units
-STEEL ROD - D3mm (Length 390mm) 1units
-STEEL ROD - D3mm (Length 330mm) 1units
-CF TUBE - D8mm (Length 500mm) 1unit
-CF TUBE - D6mm (Length 500mm) 2units
-STOP COLLARS D3,1mm  4units

-BOLT - M3X15mm (with nuts and washers)  4units
-
BOLT - M3X30mm (with nuts and washers)  2units
-SCREW - M2X8mm (aprox) 40units
-GLUE - cyanoacrylate
-PUSH RODS CONNECTORS  7units
-RUBBER BAND- L50mm (aprox.) 2 units
-FISHING LINE (for the float version only)
-SEALANT SPRAY (for the float version only)
-VELCRO


Recommended

Eclipson 3d printed aircraft
bottom of page