THE BLACKWING
EBW-160 UAV

EWB-160 also known as “The Blackwing” is a state-of-the-art 3D printed UAV.  The latest technologies and innovations have been used to achieve a unique aircraft with spectacular performance. 3D printed design freedom allowed us to create an aircraft that is both very aerodynamic and lightweight.  For instance, the airframe structure weighs in at only 275gr for an airplane with a wingspan of 1.6 meters.  The Blackwing has been designed to carry a HD/FPV camera, flight controller, GPS, vTx, etc.  All of this equipment will give you the option to fly FPV with your goggles or even full autonomous flight with the help of your computer or smartphone… But from our point of view, the most incredible aspect is that anyone can build at home and fly this aircraft for a ridiculous price.

Includes:
-STL files

-G-codes for PLA and LW-PLA (NEW)

-Decals (2 Schemes)
For free:

-Cura profiles

-Model for Real Flight simulator

€27

logo.JPG

Features:

-2 building volumes
     Small:   210X210X180(z)  

     Big:       300X300X400(z)  
-Long range performance

-FPV/HD camera ready
-Big payload (up to 800
gr)

-Replaceable keel with launch hook
-Efficient design (Max L/D = 18)

-Optional vertical stabilizer

SPECIFICATIONS

WING SPAN                1,6 m

WING SURFACE           29 dm2

WING ASPECT RATIO   9
WING AIRFOIL -Root   NACA1116
                      -
Tip     NACA0010

* Air speed (under International Standard Atmosphere) at which you need to fly to maximize the range, any speed different from that will result in less range. At this speed the drag is the minimum for the aircraft.

                                 LW-PLA    PLA
STRUCTURE WEIGHT     275gr    500gr

TAKE OF WEIGHT          760gr    1180gr
STALL SPEED                24kmh  28kmh
MAX GLIDE RATIO           17         18

WING LOADING                          26g/dm²    40/gr/dm² 
MAX RANGE SPEED*                    30 kmh     42 kmh
FLIGHT TIME (6000 mah)             140min     65 min

MAX RANGE                                   70 km       45 Km

ARRANGEMENT DRAWING AND PRINTING PARAMETERS

ASSEMBLY GUIDE AND REVIEW

SHOPPING LIST

THE FOLLOWING COMPONENTS ARE SPECIFIC FOR THE UAV VERSION
YOU NEED TO GET ALSO THE RC VERSION COMPONENTS TO FLY THE AIRCRAFT

FLIGHT CONTROLLER

Proposed - Matek Systems F411-WING
             or Matek Systems F405-WING

HD/FPV CAMERA

Proposed - Rum cam split mini 2

VTX and ANTENNA

Proposed - Matek 5.8G 40CH 25/200/500mW
                and   Realacc Pagoda RHCP Antenna 65mm 5.8G

GOGGLE

Proposed - Eachine ev 800

TELEMETRY MODULE

This component is not necessary but it is recommended to fly way point missions. FC Matek Systems F405-WING will be necessary to use this module (or equivalent with the same UARTS ports)

Proposed - 3DR 500mW 915MHz/433MHz

TUTORIALS

In case you don´t have previous experience with drones /FPV planes the following tutorials will help you to understand how to properly set up your flight controller using Inav or Arduplane.

Inav is preferred over Arduplane for beginners due to its simplicity , nevertheless arduplane is a more powerful tool especially to plan way point mission.

USING ARDUPLANE

In case you decide working with arduplane use the recommended Matek Systems F405-WING because F411 is not compatible.

Eclipson 3d printed aircraft
  • Eclipson youtube
  • 3d printed plane instagram
  • Facebook eclipson
© 2020 Eclipson Airplanes. All Rights Reserved.
Madrid, Spain
Terms & condition / Privacy policy / Refund policy / Fulfillment policy
0

MY CART