STREAM
The TL Stream is one of the best ultralight airplanes available right now on the market. The airplane has been designed and manufactured by the European company TL-ultralight. By using the latest technologies and knowledge about aerodynamics this company has been able to design a beautiful and very low drag model inspired by jet fighter planes. Our 3D printed version is inspired by that model. However, many aerodynamic features such as wing airfoil, wing torsion, dihedral, decalage, CG etc.. have been designed by us in order to improve its flight characteristics at low Reynold number. This model is a great low wing trainer, is very simple to assemble, cheap and very docile in the air. In addition to this, the low weight compared with the wing area (low wing loading) will allow you to fly pretty slowly.
€25
Features:
-Low wing trainer (LW-PLA)
-Resistant landing gear
-LG compatible with big wheel size
-Simple and fast assembly process
-Removable wing and landing gear
![]() | ![]() | ![]() | ![]() | ![]() |
---|---|---|---|---|
![]() | ![]() | ![]() | ![]() | ![]() |
![]() | ![]() |
SPECIFICATIONS
LW-PLA PLA
PRINTED WEIGHT 280gr 500gr
TAKE OF WEIGHT 550gr 850gr
STALL SPEED 24kmh 28kmh
WING LOADING 34g/dm² 53/gr/dm²
WING SPAN 1113mm (44")
WING SURFACE 16dm2
WING ASPECT RATIO 8
WING AIRFOIL NACA 2412
LENGTH 830mm
SHOPPING LIST
ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE



BATTERY
VOLTAGE - 11,1V (3S) or 7,4V (2S)
CAPACITY - 500 mAh to 2000 mAh
DISCHARGE - >20C
Recommended
PLA version: BAT2
LW-PLA version: BAT1


OTHER PARTS
-PUSH RODS - D1,2mm (min length 650mm) 2units
-STEEL ROD - D2mm (Length 150mm) 3units (do not use soft steel wire!)
-BOLT - M3X30mm (with nuts and washers) 3units
-BOLT - M3X15mm (with nuts and washers) 4units
-SCREW - M2X8mm (aprox) 16units
-VELCRO
-WIRE - 0,5 mm
-GLUE - cyanoacrylate + accelerator
-PUSH RODS CONNECTORS 2units
-SERVO LEAD EXTENSION (min 200mm) 2 units
-SPONGE WHEEL 3units (Alternatively you can print it)
Diameter 40 mm
Wide 10,5 mm
Inner hole D2mm







