top of page
PATHFINDER

Eclipson Pathfinder is a cutting edge twin engine 3D printed FPV platform. Optimized for "vase mode" for unparalleled printability and quality with LW-PLA. The Pathfinder is compatible with most FPV systems on the market, ensuring seamless integration of your preferred equipment. Its low drag design ensures optimal performance in the skies. Equipped with centre landing gear and flaps for easy and slow landings, while improving stalling characteristics, it is an ideal choice for pilots of all skill levels.

Boasting a large battery bay to accommodate various mid to long-range battery setups, this plane is perfect for extended flights. Furthermore, wing-bays on each side allow you to place electronic components, such as GPS and RX, to help prevent interference.

Experience the thrill of flying with ease and precision as you soar through the skies with this exceptional 3D printed plane.

Includes:
-STL files

-Scheme design
-G-codes

Features:
-Designed for FPV
-High performance

-Flaps

€39

Pathfinder
3D printed UAV

SPECIFICATIONS

                                    LW-PLA     PLA
PRINTED WEIGHT             600g      1000g

TAKE OFF WEIGHT           1350g     1600g      
STALL SPEED                 26km/h   35km/h
WING LOADING             41g/dm²  50g/dm² 

WING SPAN                1800mm
WING SURFACE            32dm²
WING ASPECT RATIO    10
LENGTH                     1030mm

ARRANGEMENT DRAWING AND PRINTING PARAMETERS

Pathfinder.jpg

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

NOTE: ONLY THE MANDATORY HARDWARE TO FLY THE PLANE IS RECOMMENDED HERE.

YOU CAN USE ANY FPV GEAR THAT YOU DESIRE, WE DO NOT RECOMMEND ANY IN PARTICULAR.

3D PRINTER
MIN PRINTING VOLUME - 200x200X210 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm


Recommended

FILAMENT
QUANTITY -  
≈450g (LW-PLA) or ≈900g (PLA) and 20g (TPU)


Recommended

colorfabb.JPG

ECLIPSON STANDARD POWER PACK 
SERVOS NEEDED - x6
MOTORS NEEDED - x2
ESC NEEDED - x2


Recommended

Captura.PNG

BATTERY
VOLTAGE - 11,1V (3S)
CAPACITY - 2200 mAh
DISCHARGE - >20C 

Recommended
BAT5
 

bat.jpg

RADIO CONTROL SYSTEM
MIN CHANNELS (without FC)- 7CH

Recommended

Captura.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 650mm)  2units
-PUSH RODS - D1,2mm (min length 70mm)  4units
-STEEL ROD - D2mm (Length 24mm) 1units
-CF TUBE - D8mm (Length 1000mm) 1unit
-CF TUBE - D6mm (Length 500mm) 2units

-BOLT - M3X15mm (with nuts and washers)  8units
-SCREW - M2X8mm (approx.) 30units
-GLUE - cyanoacrylate
-PUSH RODS CONNECTORS  6units (Optional)
-RUBBER BAND- L50mm (aprox.) 1 units

-VELCRO

Recommended

Eclipson 3d printed aircraft
bottom of page