Pipistrel Panthera is simply the most efficient 4 seater of the world. This beast can cruise at 200 knots while consuming only 15 gal/hours.  Panthera achieves unprecedented efficiency through careful aerodynamic shaping, retractable titanium undercarriage or lightweight advanced composite structure. 
One of the main advantages of 3D printed technology is that it allows you to build complex shapes without any extra cost or time. Pipistrel Panthera is a clear example of really complex shapes.  You won't find a sharp edge anywhere, everything is smooth and elegant. For all those reasons this airplane is a great model to be 3D printed and really take advantage of this incredible new way of building RC planes.

Includes:
-STL files

-G-codes for PLA and LW-PLA
-Scheme design
For free:

-Cura profiles
-Model for Real Flight simulator

(see video)

€35

Features:
-2 alternatives landing gears
-LW-PLA version reinforced with CF

-Removable wing and landing gear

-Full flaperon design

SPECIFICATIONS

                                    LW-PLA    PLA
PRINTED WEIGHT              380gr   700gr

TAKE OF WEIGHT               650gr  1090gr
STALL SPEED                   27kmh  32kmh
WING LOADING                              38g/dm²    61/gr/dm² 

WING SPAN               1350mm (53")

WING SURFACE          17dm2

WING ASPECT RATIO   10
LENGTH                     990mm

Note: PLA version is recomendable only for experienced pilots.

ARRANGEMENT DRAWING AND PRINTING PARAMETERS​

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER

MIN PRINTING VOLUME - 210x210X185 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm

​

Recommended

FILAMENT

QUANTITY - 380gr (LW-PLA) or 700gr (PLA or PETG)

Recommended

ECLIPSON STANDARD POWER PACK

SERVOS NEEDED - x5

​

Recommended

BATTERY

VOLTAGE - 11,1V (3S) or 14,8V (4S)

CAPACITY - 1500 mAh to 2200 mAh

DISCHARGE - >20C 

​

Recommended

PLA version: BAT3
LW-PLA version: BAT2

RADIO CONTROL SYSTEM

MIN CHANNELS - 6CH

​

Proposed - flysky fs-i6x (with i6X-iA6B receiver)

OTHER PARTS

-PUSH RODS - D1,2mm (min length 100mm)  5units
-STEEL ROD - D2mm (Length 180mm) 3units
-STOP COLLARS D2,1mm  7units
-CARBON FIBER TUBE - D6x4mm (Length 490mm) 1units 
(Not necessary for PLA version)
-CARBON FIBER TUBE - D4x3mm (Length 400mm) 2units
(Not necessary for PLA version)
-CARBON FIBER ROD - D2mm (Length 500mm) 6units
(Only 2 units for the flaperons are mandatory for the PLA version)

-BOLT - M3X25mm (with nuts and washers)  3units
-BOLT - M3X15mm (with nuts and washers)  4units

-SCREW - M2X8mm (aprox) 33units

-VELCRO

-WIRE - 0,5 mm

-GLUE - cyanoacrylate + accelerator
-PUSH RODS CONNECTORS  5units
-SERVO LEAD EXTENSION (min 200mm) 2 units
-SPONGE WHEEL  3units (Alternatively you can print it)
    Diameter 40 mm

    Wide 10,5 mm

    Inner hole D2mm