MODEL T

Eclipson Model T is a radio control seaplane and taildragger plane specifically designed to be printed. Thanks to his rectangular wing and high lift airfoil is very stable and can fly quite slow with their flaperons down, a great trainer!. The taildragger version has a wing loading of only 43 g/dm2, which is really low for a 3D printed airplane.  Printed water rudder is included, with only one servo you will move both, the water and air rudder due to an ingenious design concept.
The landing gear is very tough, hard landing will be absorbed by the deflection of steel rods, you are free to choose the wheel diameter that you want depending on your take off terrain, by choosing big wheels you will have a fantastic bush plane capable of taking off and land from rough strips or grass.

Includes:
-STL files

-Cura profiles

-G-codes

-Decals

$14

Features:
-2 version: seaplane and taildragger

-Trainer

-Strong landing gear design

-Water rudder

-Easy to build

-Flaperons

SPECIFICATIONS

WING SPAN               1,16m

WING SURFACE          18,5dm2

WING ASPECT RATIO   6,5
WING AIRFOIL            NACA4415

STRUCTURE WEIGHT   460/660* gr

TAKE OF WEIGHT        800/1000* gr

STALL SPEED              24/30*kmh

BEST GLIDE SPEED                  42/46* kmh

WING LOADING                       43/54* g/dm²

MAX POWER                             170watts

FLIGHT TIME (1500 mah)        15min
LENGTH                     757mm

* land version / water version

ARRANGEMENT DRAWING AND PRINTING PARAMETERS

 

ASSEMBLY GUIDE

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER

MIN PRINTING VOLUME - 210x210x180 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm

Proposed - Anet A8 

FILAMENT

QUANTITY - 500gr
TYPE - PLA or PETG

(Other materials can be used for category C parts)

MOTOR

KV-  800 to 1500

MAX POWER -  100 to 300 watts

MAX DIAMETER - 28mm

VOLTAGE - 11,1V (3S)

HOLES - As shown in the drawing

Proposed - Sunnysky x2212 kv1250

ESC

CURRENT - 20A or 30A

VOLTAGE - 11,1V (3S)

Proposed - Aerostar 30A

BATTERY

VOLTAGE - 11,1V (3S)

CAPACITY - 1000 mAh to 2200 mAh

DISCHARGE - >20C (the lower the more efficient)

WEIGHT - >125gr (Necessary to set the C.G.)

Proposed - Turnigy nano-tech 1500mah 3S 25~50C

PROPELLER

FOR 800KV - 8x6 (3 blades)

FOR 1200KV - 8X6

FOR 1500KV - 7x6 or 8x5

Proposed - 8X6 Anti-impact EP Propeller (CCW) 

SERVOS (x4)

CATEGORY - Micro servo 9g

VOLTAGE - 4,8V to 6V

Proposed - Turnigy™ TG9e

RADIO CONTROL SYSTEM

MIN CHANNELS - 5CH

Proposed - flysky fs-i6x

OTHER PARTS

-PUSH RODS - D1,2mm (min length 450mm)  2units

-TAPE

-BOLT - M3X30mm (with nuts and washers)  4units

-SCREW - M2X8mm (aprox)  24units

-VELCRO

-RUBBER BAND

-WIRE - 0,5 mm

-STEEL RODS D2mm  (flexible, min length 150mm)  2units

-STOP COLLARS D2,1mm  4units
-SPONGE WHEEL  2units

    Diameter 40 to 90mm  

    Hole 2mm (if diameter is bigger use bushing)

-PUSH RODS CONNECTORS  5units

-GLUE - cyanoacrylate + accelerator
-SEALANT OR PAINT - (to make waterproof the floats)

-FISHING LINE

Eclipson 3d printed aircraft
0

MY CART