MODEL C

Eclipson model C is an atypical bush plane, the design is not based on any other bush plane, it has been designed from scratch to maximize its aerodynamic performances taking advantage of the design freedom provided by additive manufacturing. The model is very versatile: it can be used by beginners if printed with LW-PLA due to its low flying speed, docile stall and durable landing gear. But fast or aerobatic flying are totally possible with this model due to its low drag design and huge control surfaces. We provide you two types of wintips that can be easily fixed in his position thanks to a simple and effective magnet system, that concept will make the transportation easier. The landing gear based on steel rods is not only very durable but also versatile, you can use the wheel size that you want, even 3d printed wheel pants are provided.

Includes:
-STL files

-2 Scheme design
-G-codes for PLA and LW-PLA

€27

€20,25

Features:

-Interchangeable wingtips
-Bush plane

-Printed without retractions

-Durable landing gear

-Full flaperon design

-Trainer (LW-PLA)

2 Schemes
Big tundra wheels
Sport look
Wheel pants
Easy acces
Magnets
2 wingtips interchangeable

SPECIFICATIONS

                                    LW-PLA    PLA
PRINTED WEIGHT             ≈240g   ≈470g

TAKE OFF WEIGHT            560g*1  920g*2
                                     510g*3  850g*3

STALL SPEED                  24km/h  32km/h
MIN WING LOADING                       28g/dm²    47gr/dm² 

WING SPAN               1100mm (43")

WING SURFACE          18dm²

WING ASPECT RATIO   6,9
LENGTH                     760mm

*1 Weight using 3D printed tundra tyres with LW-TPU
*2 Weight using 3D printed tundra tyres with normal TPU
(Not recommended, use commercial foam wheels or LW-TPU to save weight)

*3 Weight using small wheels

ARRANGEMENT DRAWING AND PRINTING PARAMETERS

Printing_parameters.jpg

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER

MIN PRINTING VOLUME - 150x150X190 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm

Recommended

FILAMENT

QUANTITY -  ≈240g (LW-PLA/LW-TPU) or ≈470g (PLA)


Recommended

colorfabb.JPG

ECLIPSON STANDARD POWER PACK

SERVOS NEEDED - x4

Recommended

Captura.PNG

BATTERY

VOLTAGE - 7,4V (2S) or 11,1V (3S)

CAPACITY - 500 mAh to 1500 mAh

DISCHARGE - >20C 

Recommended

PLA version: BAT2
LW-PLA version: BAT1

bat.jpg

RADIO CONTROL SYSTEM

MIN CHANNELS - 6CH

Recommended

Captura.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 450mm)  4units
-STEEL ROD - D2
mm (Length 200mm) 4units
-
STOP COLLARS D2,1mm  4units
-BOLT - M3X15mm (with nuts and washers)  4units
-
BOLT - M3X30mm (with nuts and washers)  2units
(alternatively you can use rubber bands to fix the wing)
-RUBBER BAND  2units
(alternatively you can use bolts to fix the wing)

-MAGNETS - 10x5x3mm 6units
-SCREW - M2X8mm (aprox) 22units
-VELCRO
-GLUE - cyanoacrylate + accelerator
-
PUSH RODS CONNECTORS  4units
-SPONGE WHEEL 2units (Alternatively you can print it)

Eclipson 3d printed aircraft