MODEL A XL

Eclipson model A XL is the big brother of our successful trainer model A. The airplane includes many new features such as Independent flaps, tail wheel, aerodynamic 3d printed hinges or stronger LG concept among many other details. If we compare the smaller version with this one we can find some disadvantages like more printing and assembly time but in exchange you will get an airplane more stable, more polivalent and in general easier to fly. Independent flaps will allow you to make an extremely low fly while having excellent aileron authority. The new landing gear concept is very strong and compatible with any kind of wheel size allowing you to take off even from grass strips. Alternatively you can even build the model without landing gear, hand launching the plane is extremely easy and safe. Despite the bigger size the model can be still powered with our standardized electronic components, so just reuse them from any other Eclipson model!

Includes:
-STL files

-Scheme design
-G-codes for PLA and LW-PLA

€25

Features:

-Trainer

-Durable landing gear

-Compatible with any wheel size

-Flaps + ailerons

-Removable wing and LG
-Printed without retractions

Model A
Flaps + ailerons
Tail wheel
Huge internal space
Strong LG concept

SPECIFICATIONS

                                    LW-PLA    PLA
PRINTED WEIGHT             ≈450g   ≈900g

TAKE OFF WEIGHT            900g*  1400g*        STALL SPEED                  23km/h  28km/h
MIN WING LOADING                       30g/dm²    45gr/dm² 

WING SPAN               1400mm (55")
WING SURFACE          30dm²
WING ASPECT RATIO   6,6

* Weight including landing gear

ARRANGEMENT DRAWING AND PRINTING PARAMETERS

Printing_parameters.jpg

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER
MIN PRINTING VOLUME - 200x200X190 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm


Recommended

FILAMENT
QUANTITY -  ≈450g (LW-PLA) or ≈900g (PLA)

Recommended

colorfabb.JPG

ECLIPSON STANDARD POWER PACK
SERVOS NEEDED - x6

Recommended

Captura.PNG

BATTERY
VOLTAGE - 7,4V (2S) or 11,1V (3S)
CAPACITY - 500 mAh to 1500 mAh
DISCHARGE - >20C 

Recommended
PLA version: BAT3
LW-PLA version: BAT2

bat.jpg

RADIO CONTROL SYSTEM
MIN CHANNELS - 7CH

Recommended

Captura.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 550mm)  4units
-STEEL ROD - D3mm (Length 400mm) 2units
-
CARBON FIBER TUBE - D8x6mm (Length 500mm) 1units
-CARBON FIBER TUBE - D6x4mm (Length 290mm) 2units
-STOP COLLARS D2,1mm  5units

-BOLT - M3X15mm (with nuts and washers)  4units
-
BOLT - M3X30mm (with nuts and washers)  2units
-MAGNETS - 10x5x3mm 2units
-SCREW - M2X8mm (aprox) 40units
-VELCRO
-GLUE - cyanoacrylate + accelerator
-
PUSH RODS CONNECTORS  6units

Eclipson 3d printed aircraft