Model D

Eclipson Model D is a light sports model. This airplane is very easy to print, easy to assemble, light and it shares the same electronics of any other Eclipson model. Even if printed with PLA/PETG, the wing loading is below 50g/dm2. As usual, the model has been designed to be compatible with LW-PLA, if you decide to print the model with this material, the plane becomes a great trainer due to its slow flight speed (see video). The landing gear system is simple, strong, replaceable and compatible with big wheels allowing you to take off from grass or any other terrain.

Includes:
-STL files

-G-codes for PLA and LW-PLA
-Scheme design
For free:

-Cura profiles
-
Fuselage for testing

-FPV kit
-Model for Real Flight simulator
 
(see video)

€18.75

Features:
-Low wing trainer (LW-PLA)

-Resistant landing gear
-LG compatible with big wheel size

-Simple and fast assembly process

-Removable wing and landing gear

logo.JPG
Model D top view
3D printed sport model
Low wing rc plane
steerable landing gear
T tail configuration
D shape
Printable rc aircraft
Model D
Strong landing gear
Winglets design
By Eclipson
Stearable wheel

SPECIFICATIONS

                                    LW-PLA    PLA
PRINTED WEIGHT              220gr   410gr

TAKE OF WEIGHT               500gr  750gr
STALL SPEED                   23kmh  27kmh
WING LOADING                              31g/dm²    47/gr/dm² 

WING SPAN               1220mm (48")

WING SURFACE          16dm2

WING ASPECT RATIO   8,4
WING AIRFOIL            NACA 2412
LENGTH                     835mm

ARRANGEMENT DRAWING AND PRINTING PARAMETERS

ALTHOUGH THE ASSEMBLY VIDEO BELONGS TO ANOTHER MODEL THE CONCEPT OF THE ASSEMBLY PROCESS IS BASICALLY THE SAME

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER

MIN PRINTING VOLUME - 160x160X190 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm

Recommended

FILAMENT

QUANTITY - 220gr (LW-PLA) or 410gr (PLA or PETG)


Recommended

ECLIPSON STANDARD POWER PACK

SERVOS NEEDED - x4

Recommended

BATTERY

VOLTAGE - 11,1V (3S) or 7,4V (2S)

CAPACITY - 500 mAh to 2000 mAh

DISCHARGE - >20C 

Recommended

PLA version: BAT2

LW-PLA version: BAT1

RADIO CONTROL SYSTEM

MIN CHANNELS - 5CH

Proposed - flysky fs-i6x (with i6X-iA6B receiver)

OTHER PARTS

-PUSH RODS - D1,2mm (min length 650mm)  1units
-STEEL ROD - D2
mm (Length 150mm) 3units (Do not use soft steel wire!)

-BOLT - M3X30mm (with nuts and washers)  3units
-
BOLT - M3X15mm (with nuts and washers)  4units

-SCREW - M2X8mm (aprox)  16units

-VELCRO

-WIRE - 0,5 mm

-GLUE - cyanoacrylate + accelerator
-
PUSH RODS CONNECTORS  2units
-
SERVO LEAD EXTENSION (min 200mm) 2 units
-
SPONGE WHEEL  3units (Alternatively you can print it)
    Diameter 40 mm

    Wide 10,5 mm

    Inner hole D2mm 

Eclipson 3d printed aircraft
  • Eclipson youtube
  • 3d printed plane instagram
  • Facebook eclipson
© 2020 Eclipson Airplanes. All Rights Reserved.
Madrid, Spain
Terms & condition / Privacy policy / Refund policy / Fulfillment policy
0

MY CART