top of page
FOX

Introducing the Eclipson FOX, a 3D-printed RC version of the iconic FOX glider. With a 2-meter wingspan, this model is built for aerobatic performance, featuring large control surfaces for enhanced maneuverability. The flapless design reduces weight and inertia, maximizing its aerobatic capabilities. The ailerons can be used as spoilerons, allowing for shorter landings. Optimized for easy 3D printing using the "spiralize outer contour" setting, the Eclipson FOX also features a full male-female fitting system for quick and simple assembly. Whether you're an experienced pilot or new to 3D-printed aircraft, the Eclipson FOX delivers a high-performance and exciting flight experience.

Includes:
-STL files

-Scheme design
-G-codes

€39

Features:
-Aerobatic

-Easy to print

-Spiralize printing

3D printed Eclipson FOX
Tail servos
Big internal space
Huge control surfaces
3D printed rc glider
2 meter span
4 wheels
FOX
Beautiful.. plane

SPECIFICATIONS

PRINTED WEIGHT              500g       
TAKE OFF WEIGHT            1050g   
STALL SPEED                 24km/h  
WING LOADING             34g/dm²

WING SPAN                 2000mm (78")
WING SURFACE            31dm²
WING ASPECT RATIO    11
LENGTH                      990mm

Note: It is required the use of foaming filament for this model.

ARRANGEMENT DRAWING AND PRINTING PARAMETERS​

_Fox_2D.jpg

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER
MIN PRINTING VOLUME - 200x200X210 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm


Recommended

FILAMENT
QUANTITY -  
460g (LW-PLA)
30g (PLA) 
10g (PLA)


Recommended

colorfabb.JPG

ECLIPSON STANDARD POWER PACK
SERVOS NEEDED - x4

Recommended

*Use folding propeller:
Folding prop 8x6

Captura.PNG

BATTERY
VOLTAGE - 11,1V (3S)
CAPACITY - 2200 mAh
DISCHARGE - >20C 

Recommended
BAT5
 

bat.jpg

RADIO CONTROL SYSTEM
MIN CHANNELS - 5CH

Recommended

Captura.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 130mm) 4units
-PUSH RODS CONNECTORS  4units (Optional)
-STEEL ROD - D2mm (Length 17mm) 1unit
-CF TUBE - D10mm (Length 900mm) 1unit
-CF TUBE - D8mm (Length 500mm) 2units

-BOLT - M3X15mm (with nuts and washers)  4units
-SERVO LEAD EXTENSION (
min 450
mm) 4 units
-SCREW - M2X8mm (approx.) 22units
-GLUE - cyanoacrylate
-RUBBER BAND- L50mm (approx.)
-VELCRO


Recommended

Eclipson 3d printed aircraft
bottom of page