top of page
MODEL 3D

Eclipson Model 3D is an airplane specifically designed for 3D flying. It can perform all kinds of aerobatic manoeuvres with exceptional precision. The wing loading and the aerobatics achieved by this model are comparable to the best performing 'foamy' counterparts that you can find on the market, but for a fraction of the cost of course. The airplane is extremely easy to print thanks to the 'no retraction' design philosophy which minimises print head travel. Although the airplane is primarily designed for aerobatic flying, it is also a great sport flyer suitable for most pilot skill levels. For the less experienced we provide a second motor mount where the standard power pack, less powerful, power pack can be used.

Includes:
-STL files

-2 Scheme design
-G-codes

€42

Features:
-High precision
-Large control surfaces

-Printed without retractions

2 Scheme design
Acro rc airplane
Huge control surfaces
Excellent aileron authority
Big internal space
Precise control

SPECIFICATIONS

                                     
PRINTED WEIGHT               650g     

TAKE OFF WEIGHT            1200g          
STALL SPEED                 25km/h  
MIN WING LOADING      42g/dm²    

WING SPAN                1200mm (47")
WING SURFACE           28dm²
WING ASPECT RATIO   4,8
LENGTH                     1200mm

Note: It is required the use of LW-PLA for this model.

ARRANGEMENT DRAWING AND PRINTING PARAMETERS

Printing_parameters_3D.jpg

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER
MIN PRINTING VOLUME - 200x200X190 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm


Recommended

FILAMENT
QUANTITY -  400g (LW-PLA) and 250 (PLA)

Recommended

colorfabb.JPG

CONFIGURATION 1

POWERFUL POWER PACK

MOTOR
KV-  800 to 1200
MAX POWER -  300 to 1000 watts
DIAMETER - 35mm
VOLTAGE - Up to 14,8V (4S)

Proposed
SunnySky X2814 900KV

ESC

CURRENT - 50A

VOLTAGE -  Up to 14,8V (4S)

Proposed
Aerostar 50A

2814-.jpg
ESC.JPG

PROPELLER
FOR 900KV - 11x7
FOR 1200KV - 11X5.5

Proposed:
Propeller knife horse paddle

prop.JPG

CONFIGURATION 2

ECLIPSON STANDARD POWER PACK
SERVOS NEEDED - x4

Recommended
 

Captura.PNG

BATTERY
VOLTAGE - 11,1V (3S) or 14,8 (4S)
CAPACITY - 1800 mAh to 2200 mAh
DISCHARGE - >20C 

Recommended
BAT3
 

1800.JPG

RADIO CONTROL SYSTEM
MIN CHANNELS - 5CH

Recommended

Captura.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 400mm)  5units
-STEEL ROD - D3mm (Length 190mm) 2units
-CF TUBE - D8mm (Length 500mm) 4units
-CF TUBE - D4mm (Length 400mm) 1unit
-STOP COLLARS D2,1mm  3units

-BOLT - M3X15mm (with nuts and washers)  4units
-SCREW - M2X8mm (aprox) 22units
-GLUE - cyanoacrylate
-
PUSH RODS CONNECTORS  4units
-RUBBER BAND- L50mm (aprox.)

-VELCRO
-
SERVO LEAD EXTENSION (min 450mm) 2 units
-
SERVO LEAD EXTENSION (min 100mm) 2 units

Recommended

Eclipson 3d printed aircraft
Subs
bottom of page