top of page
E-VTOL-1

On average a quadcopter consumes 3 times more energy than an equivalent airplane to travel a given distance, despite this huge inefficiency quads are widely used due to other advantages like the flexibility to take off and land anywhere, VTOL aircrafts were born with the objective of getting the best of both worlds. Despite the complexity of hover flight and transitions now thanks to the democratization of high technology anyone can build an engineering marvel like this at home for an extremely low price!. E-VTOL-1 is a versatile platform that can be used to fly FPV, to plan any kind of mission with arduplane, or just to fly line of sight, your imagination is the limit!. 

Includes:
-STL files

-G-codes for PLA and LW-PLA
-Scheme design

€27

Features:
-Easy to print /build
-
FPV camera ready

-Pitot tube ready

SPECIFICATIONS

                                    LW-PLA    PLA
PRINTED WEIGHT              300g    550g

TAKE OFF WEIGHT             800g    1100g
STALL SPEED                   32km/h  40km/h
WING LOADING              40g/dm²  55g/dm² 

WING SPAN               1065mm
WING SURFACE          20dm2
WING ASPECT RATIO   4,4
LENGTH                     370mm

ARRANGEMENT DRAWING AND PRINTING PARAMETERS​

Printing_parameters.jpg

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER
MIN PRINTING VOLUME - 170x170X190 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm


Recommended

FILAMENT
QUANTITY - 300g (LW-PLA) or 550g (PLA or PETG)

Recommended

colorfabb.JPG

ECLIPSON STANDARD POWER PACK
SERVOS NEEDED - x2
MOTORS NEEDED - x2
ESC NEEDED- X2

Recommended

PROPELER PAIR - 8x4 (CCW and CW)

Captura.PNG

BATTERY
VOLTAGE - 14,8V (4S)
CAPACITY - 1500 mAh to 2200 mAh
DISCHARGE - >20C 

Recommended
BAT3

2.2.JPG

RADIO CONTROL SYSTEM
MIN CHANNELS - 5CH

Recommended

Captura.JPG

FLIGHT CONTROLLER

Proposed - Matek Systems F405-WING

FC.JPG
gps.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 400mm)  2units
-CARBON FIBER TUBE - D4x3mm (length 345mm) 1unit 
-
WIRE - 0,5 mm 
-BOLT - M3X15mm (with nuts and washers)  8units
-SCREW - M2X8mm (aprox.) 46units
-VELCRO

-GLUE - cyanoacrylate
-
PUSH RODS CONNECTORS -  2units


Recommended

THE FOLLOWING COMPONENTS ARE NOT MANDATORY TO FLY THE AIRPLANE

FPV CAMERA

Proposed - Runcam Micro Swift 3

cam.JPG

VTX and ANTENNA

Proposed - Eachine TX805 5.8G
                and   Foxeer Pagoda Pro 5.8GHz

antenna.JPG
pitot.JPG
Eclipson 3d printed aircraft
bottom of page