MODEL Z
Eclipson Model Z is a radio controlled airplane specifically designed to be printed and compatible with LW-PLA. Its design is inspired by nature: The structural concept for the wing is the result of millions of years of evolution of several species like trees, insects or birds. All this is possible thanks to the design freedom that 3D printing technology give us. (read more). Model Z is very aerodynamic and efficient thanks to its smooth fuselage, winglets design or wing shape. (read more). Fuselage can be printed with or without an air intake epending on your own ambient air temperatures, even wheels can be printed with flexible tyres if desired.
€19
Features:
-Steerable nose gear
-Full suspension
-Easy to build
-Efficient aerodynamic shape
 |  |  |  |  |
|---|---|---|---|---|
 |  |  |  |  |
 |  |
SPECIFICATIONS
WING SPAN 1,2m
WING SURFACE 14,3dm2
WING ASPECT RATIO 9,8
WING AIRFOIL NACA2412
LW-PLA PLA
STRUCTURE WEIGHT 275gr 475gr
TAKE OF WEIGHT 500gr 770gr
STALL SPEED 25kmh 29kmh
MAX GLIDE RATIO 15 18
WING LOADING 35g/dm² 54/gr/dm²
STALL SPEED 28kmh
GLIDE SPEED 36kmh
MAX SPEED 70kmh
MAX LIFT TO DRAG RATIO 5.8
POWER 150watts
FLIGHT TIME (1500 mah) 15min
ASSEMBLY GUIDE AND REVIEW
SHOPPING LIST
ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE
BATTERY
VOLTAGE - 11,1V (3S) or 7,4V (2S)
CAPACITY - 500 mAh to 2000 mAh
DISCHARGE - >20C
Recommended
PLA version: BAT2
LW-PLA version: BAT1
OTHER PARTS
-PUSH RODS - D1,2mm (min length 500mm) 3units
-TAPE
-BOLT - M3X30mm (with nuts and washers) 3units
-SCREW - M2X8mm (aprox) 18units
-VELCRO
-RUBBER BAND
-WIRE - 0,5 mm
-GLUE - cyanoacrylate + accelerator
OPTIONAL PARTS
(The following parts are not necessary, but they are recommended)
-SPONGE WHEEL 3units
Diameter 40mm
Wide 10,5mm
Hole 2mm
-STOP COLLARS D2,1mm 6units
-PUSH RODS CONNECTORS 5units
