top of page
MODEL Z

Eclipson Model Z is a radio controlled airplane specifically designed to be printed and compatible with LW-PLA. Its design is inspired by nature: The structural concept for the wing is the result of millions of years of evolution of several species like trees, insects or birds. All this is possible thanks to the design freedom that 3D printing technology give us. (read more). Model Z is very aerodynamic and efficient thanks to its smooth fuselage, winglets design or wing shape. (read more). Fuselage can be printed with or without an air intake epending on your own ambient air temperatures, even wheels can be printed with flexible tyres if desired.

MODEL Z
STREAMLINED
FPV
EFFICIENCY
HIGH ASPECT RATIO
FULL SUSPENSION
EASY ACCESS
DETACHABLE
3D PRINTED SPINNER
TAPE HINGES

SPECIFICATIONS

RC eclipson model Y printed
RC model Y printed
3D printed plae eclipson model Y

WING SPAN               1,2m

WING SURFACE          14,3dm2

WING ASPECT RATIO   9,8
WING AIRFOIL            NACA2412

                                 LW-PLA    PLA
STRUCTURE WEIGHT     275gr    475gr

TAKE OFF WEIGHT         500gr    770gr
STALL SPEED                25kmh  29kmh
MAX GLIDE RATIO           15         18

WING LOADING         35g/dm²    54g/dm² 

STALL SPEED              28kmh

GLIDE SPEED                            36kmh

MAX SPEED                               70kmh

MAX LIFT TO DRAG RATIO      5.8

POWER                                      150watts

FLIGHT TIME (1500 mah)        15min

ARRANGEMENT DRAWING AND PRINTING PARAMETERS

Printing_parameters.jpg

ASSEMBLY GUIDE AND REVIEW

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER

MIN PRINTING VOLUME - 150x150x185 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm

Recommended

FILAMENT

QUANTITY - 275gr (LW-PLA) 475gr (PLA or PETG)

Recommended

ECLIPSON STANDARD POWER PACK

SERVOS NEEDED - x4

Recommended

Captura.PNG

BATTERY

VOLTAGE - 11,1V (3S) or 7,4V (2S)

CAPACITY - 500 mAh to 2000 mAh

DISCHARGE - >20C 

Recommended

PLA version: BAT2

LW-PLA version: BAT1

bat.jpg

RADIO CONTROL SYSTEM

MIN CHANNELS - 5CH

Recommended

Captura.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 500mm)  3units
-TAPE
-BOLT - M3X30mm (with nuts and washers)  3units
-SCREW - M2X8mm (aprox)  18units
-VELCRO
-RUBBER BAND
-WIRE - 0,5 mm
-GLUE - cyanoacrylate
-STOP COLLARS D2,1mm  6units
-PUSH RODS CONNECTORS  5units


Recommended

Eclipson 3d printed aircraft
bottom of page