top of page
MODEL D2
Eclipson Model D2 is a modern high performance sport RC plane specifically designed to be printed. Even if printed with PLA, the wing loading is below 50g/dm2. As usual, the model has been designed to be compatible with LW-PLA making this design suitable even for beginners. The landing gear system is simple, durable, replaceable and compatible with big wheels allowing you to take off from grass or any other terrain.
Includes:
-STL files
-G-codes for PLA and LW-PLA
-Scheme design
For free:​
-Model for Real Flight simulator
(see video)
€25
Features:
-Durable landing gear
-LG compatible with big wheel size
-Simple and fast assembly process
-Removable wing and LG
SHOPPING LIST
ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE
FILAMENT
QUANTITY - 220g (LW-PLA) or 410g (PLA or PETG)
Recommended
BATTERY
VOLTAGE - 11,1V (3S) or 7,4V (2S)
CAPACITY - 500 mAh to 2000 mAh
DISCHARGE - >20C
​
Recommended
PLA version: BAT2
LW-PLA version: BAT1
RADIO CONTROL SYSTEM
MIN CHANNELS - 5CH
Recommended
OTHER PARTS
-PUSH RODS - D1,2mm (min length 650mm) 1units
-STEEL ROD - D2mm (Length 150mm) 3units
-BOLT - M3X30mm (with nuts and washers) 3units
-BOLT - M3X15mm (with nuts and washers) 4units
-SCREW - M2X8mm (aprox) 16units
-VELCRO
-WIRE - 0,5 mm
-GLUE - cyanoacrylate + accelerator
-PUSH RODS CONNECTORS 2units
-SERVO LEAD EXTENSION (min 200mm) 2 units
Recommended
bottom of page